feat(protobufs): sync to firmware-current and consume workspace package (#1097)
* feat(protobufs): sync to firmware-current and consume workspace package Sync the vendored .proto sources to firmware-current (v2.7.25+48), regenerate the v2 TS bindings, and consume the workspace @meshtastic/protobufs (workspace:*) in place of the stale JSR 2.7.20 — finishing the monorepo migration (core was already workspace:*). Includes the one required breaking-change fix: admin nodedb_reset changed int32 to bool, so resetNodes() now sends value: true. * build(protobufs): vendor generated bindings for workspace consumers The package is consumed via workspace:* — its exports point at the TS source, which imports ./dist/meshtastic/*_pb.ts — so the generated output must exist at build time. CI builds web/core with no codegen step and the runners have no buf CLI, so the bindings are vendored here (kept gitignored; lint/format skip them). Regenerate with: pnpm --filter @meshtastic/protobufs gen * fix(protobufs): clean script removes the actual generated output dir buf writes bindings to packages/ts/dist, but clean was removing a non-existent root dist — so it never cleaned stale output. Addresses Copilot review feedback. * refactor: move web app packages/web -> apps/web Aligns the web app with the apps/web layout (matching the Vercel web-test Root Directory and the SDK-migration direction). Pure directory move plus root config: pnpm-workspace (adds apps/*), vitest projects, root tsconfig reference, and the pr/release-web/nightly workflows. vercel.json moved with the app. Build + 36 validation tests green. * feat: config fields, module pages, key verification, telemetry capture Incorporates the firmware-current feature work onto the protobuf foundation: new config fields (Display message bubbles; LoRa fem_lna_mode + serial_hal_only; Telemetry air_quality_screen_enabled); 4 new ModuleConfig pages (TrafficManagement, StatusMessage, TAK, RemoteHardware); the manual Key Verification flow (sendKeyVerification + ClientNotificationDialog stages + Verify Key button); live telemetry capture (nodeDB addDeviceMetrics) and admin hardening (toggleMutedNode, graceful PortNum default); plus the sdk-preview ConfigEditor demo and store/config tests. Build + lint + format + 131 tests green. * chore: drop #1062 (unsaved-change-detection) to match upstream revert #1062 was merged to main by accident (per @danditomaso) and is being reverted. Reverse-applied its diff here via 3-way so #1097 stays consistent with where main is headed, while keeping the feature changes layered on the same files (deviceStore/changeRegistry). Build + 131 tests + lint + format green. * fix(nodes): clean up SNR display in node table and map popup SNR is a ratio measured in dB, not dBm (which is absolute power); the node table and map popup both mislabeled it and crammed three values together: '0dBm/50%/50raw'. The trailing '%/raw' pair was the same heuristic ((snr+10)*5) shown twice — once clamped, once not. Render SNR in dB rounded to one decimal, color-coded by a 0-100% signal-quality heuristic (green/yellow/red), with the quality percentage as a muted secondary. Drop the redundant raw value. Adds unit.db; this matches the existing SNRTooltip, which already renders dB.
This commit is contained in:
Ben Meadors
@@ -0,0 +1,71 @@
|
||||
{
|
||||
"page": {
|
||||
"sectionLabel": "Канали",
|
||||
"channelName": "Канал: {{channelName}}",
|
||||
"broadcastLabel": "Основний",
|
||||
"channelIndex": "Кн {{index}}",
|
||||
"import": "Імпортувати",
|
||||
"export": "Export"
|
||||
},
|
||||
"validation": {
|
||||
"pskInvalid": "Please enter a valid {{bits}} bit PSK."
|
||||
},
|
||||
"settings": {
|
||||
"label": "Channel Settings",
|
||||
"description": "Crypto, MQTT & misc settings"
|
||||
},
|
||||
"role": {
|
||||
"label": "Роль",
|
||||
"description": "Device telemetry is sent over PRIMARY. Only one PRIMARY allowed",
|
||||
"options": {
|
||||
"primary": "PRIMARY",
|
||||
"disabled": "DISABLED",
|
||||
"secondary": "SECONDARY"
|
||||
}
|
||||
},
|
||||
"psk": {
|
||||
"label": "Pre-Shared Key",
|
||||
"description": "Supported PSK lengths: 256-bit, 128-bit, 8-bit, Empty (0-bit)",
|
||||
"generate": "Згенерувати"
|
||||
},
|
||||
"name": {
|
||||
"label": "Ім'я",
|
||||
"description": "A unique name for the channel <12 bytes, leave blank for default"
|
||||
},
|
||||
"uplinkEnabled": {
|
||||
"label": "Uplink Enabled",
|
||||
"description": "Send messages from the local mesh to MQTT"
|
||||
},
|
||||
"downlinkEnabled": {
|
||||
"label": "Downlink Enabled",
|
||||
"description": "Send messages from MQTT to the local mesh"
|
||||
},
|
||||
"positionPrecision": {
|
||||
"label": "Місце розташування",
|
||||
"description": "The precision of the location to share with the channel. Can be disabled.",
|
||||
"options": {
|
||||
"none": "Не повідомляти місце знаходження",
|
||||
"precise": "Точне місце розташування",
|
||||
"metric_km23": "У межах 23 км",
|
||||
"metric_km12": "У межах 12 км",
|
||||
"metric_km5_8": "У межах 5,8 км",
|
||||
"metric_km2_9": "У межах 2,9 км",
|
||||
"metric_km1_5": "У межах 1,5 км",
|
||||
"metric_m700": "У межах 700 м",
|
||||
"metric_m350": "У межах 350 м",
|
||||
"metric_m200": "У межах 200 м",
|
||||
"metric_m90": "У межах 90 м",
|
||||
"metric_m50": "У межах 50 м",
|
||||
"imperial_mi15": "У межах 15 миль",
|
||||
"imperial_mi7_3": "У межах 7,3 милі",
|
||||
"imperial_mi3_6": "У межах 3,6 милі",
|
||||
"imperial_mi1_8": "У межах 1,8 милі",
|
||||
"imperial_mi0_9": "У межах 0,9 милі",
|
||||
"imperial_mi0_5": "У межах 0,5 милі",
|
||||
"imperial_mi0_2": "У межах 0,2 милі",
|
||||
"imperial_ft600": "У межах 600 фт",
|
||||
"imperial_ft300": "У межах 300 фт",
|
||||
"imperial_ft150": "У межах 150 фт"
|
||||
}
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,51 @@
|
||||
{
|
||||
"emptyState": "No results found.",
|
||||
"page": {
|
||||
"title": "Command Menu"
|
||||
},
|
||||
"pinGroup": {
|
||||
"label": "Pin command group"
|
||||
},
|
||||
"unpinGroup": {
|
||||
"label": "Unpin command group"
|
||||
},
|
||||
"goto": {
|
||||
"label": "Goto",
|
||||
"command": {
|
||||
"messages": "Повідомлення",
|
||||
"map": "Мапа",
|
||||
"config": "Config",
|
||||
"nodes": "Вузли"
|
||||
}
|
||||
},
|
||||
"manage": {
|
||||
"label": "Manage",
|
||||
"command": {
|
||||
"switchNode": "Switch Node",
|
||||
"connectNewNode": "Connect New Node"
|
||||
}
|
||||
},
|
||||
"contextual": {
|
||||
"label": "Contextual",
|
||||
"command": {
|
||||
"qrCode": "QR-код",
|
||||
"qrGenerator": "Генератор",
|
||||
"qrImport": "Імпортувати",
|
||||
"scheduleShutdown": "Розклад вимкнення",
|
||||
"scheduleReboot": "Reboot Device",
|
||||
"resetNodeDb": "Reset Node DB",
|
||||
"dfuMode": "Enter DFU Mode",
|
||||
"factoryResetDevice": "Factory Reset Device",
|
||||
"factoryResetConfig": "Factory Reset Config",
|
||||
"disconnect": "Disconnect"
|
||||
}
|
||||
},
|
||||
"debug": {
|
||||
"label": "Debug",
|
||||
"command": {
|
||||
"reconfigure": "Reconfigure",
|
||||
"clearAllStoredMessages": "Clear All Stored Message",
|
||||
"clearAllStores": "Clear All Local Storage"
|
||||
}
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,165 @@
|
||||
{
|
||||
"button": {
|
||||
"apply": "Застосувати",
|
||||
"addConnection": "Add Connection",
|
||||
"saveConnection": "Save connection",
|
||||
"backupKey": "Backup Key",
|
||||
"cancel": "Скасувати",
|
||||
"connect": "Connect",
|
||||
"clearMessages": "Clear Messages",
|
||||
"close": "Закрити",
|
||||
"confirm": "Confirm",
|
||||
"delete": "Видалити",
|
||||
"dismiss": "Dismiss",
|
||||
"download": "Download",
|
||||
"disconnect": "Disconnect",
|
||||
"export": "Export",
|
||||
"generate": "Згенерувати",
|
||||
"regenerate": "Перегенерувати",
|
||||
"import": "Імпортувати",
|
||||
"message": "Повідомлення",
|
||||
"now": "Зараз",
|
||||
"ok": "Гаразд",
|
||||
"print": "Print",
|
||||
"remove": "Видалити",
|
||||
"requestNewKeys": "Request New Keys",
|
||||
"requestPosition": "Запитати позицію",
|
||||
"reset": "Скинути",
|
||||
"retry": "Retry",
|
||||
"save": "Зберегти",
|
||||
"setDefault": "Set as default",
|
||||
"unsetDefault": "Unset default",
|
||||
"scanQr": "Сканувати QR-код",
|
||||
"traceRoute": "Trace Route",
|
||||
"submit": "Submit"
|
||||
},
|
||||
"app": {
|
||||
"title": "Meshtastic",
|
||||
"fullTitle": "Meshtastic Web Client"
|
||||
},
|
||||
"loading": "Завантаження...",
|
||||
"unit": {
|
||||
"cps": "CPS",
|
||||
"dbm": "дБм",
|
||||
"hertz": "Гц",
|
||||
"hop": {
|
||||
"one": "Hop",
|
||||
"plural": "Hops"
|
||||
},
|
||||
"hopsAway": {
|
||||
"one": "{{count}} hop away",
|
||||
"plural": "{{count}} hops away",
|
||||
"unknown": "Unknown hops away"
|
||||
},
|
||||
"megahertz": "МГц",
|
||||
"kilohertz": "кГц",
|
||||
"raw": "raw",
|
||||
"meter": {
|
||||
"one": "Метр",
|
||||
"plural": "Meters",
|
||||
"suffix": "м"
|
||||
},
|
||||
"kilometer": {
|
||||
"one": "Kilometer",
|
||||
"plural": "Kilometers",
|
||||
"suffix": "km"
|
||||
},
|
||||
"minute": {
|
||||
"one": "Minute",
|
||||
"plural": "Хвилин"
|
||||
},
|
||||
"hour": {
|
||||
"one": "Година",
|
||||
"plural": "Годин"
|
||||
},
|
||||
"millisecond": {
|
||||
"one": "Мілісекунда",
|
||||
"plural": "Мілісекунди",
|
||||
"suffix": "мс"
|
||||
},
|
||||
"second": {
|
||||
"one": "Секунда",
|
||||
"plural": "Секунд"
|
||||
},
|
||||
"day": {
|
||||
"one": "День",
|
||||
"plural": "Днів",
|
||||
"today": "Today",
|
||||
"yesterday": "Yesterday"
|
||||
},
|
||||
"month": {
|
||||
"one": "Місяць",
|
||||
"plural": "Місяців"
|
||||
},
|
||||
"year": {
|
||||
"one": "Year",
|
||||
"plural": "Years"
|
||||
},
|
||||
"snr": "SNR",
|
||||
"volt": {
|
||||
"one": "Вольт",
|
||||
"plural": "Volts",
|
||||
"suffix": "V"
|
||||
},
|
||||
"record": {
|
||||
"one": "Records",
|
||||
"plural": "Records"
|
||||
},
|
||||
"degree": {
|
||||
"one": "Degree",
|
||||
"plural": "Degrees",
|
||||
"suffix": "°"
|
||||
}
|
||||
},
|
||||
"security": {
|
||||
"0bit": "Empty",
|
||||
"8bit": "8 bit",
|
||||
"128bit": "128 bit",
|
||||
"256bit": "256 bit"
|
||||
},
|
||||
"unknown": {
|
||||
"longName": "Unknown",
|
||||
"shortName": "UNK",
|
||||
"notAvailable": "N/A",
|
||||
"num": "??"
|
||||
},
|
||||
"nodeUnknownPrefix": "!",
|
||||
"unset": "UNSET",
|
||||
"fallbackName": "Meshtastic {{last4}}",
|
||||
"node": "Node",
|
||||
"formValidation": {
|
||||
"unsavedChanges": "Unsaved changes",
|
||||
"tooBig": {
|
||||
"string": "Too long, expected less than or equal to {{maximum}} characters.",
|
||||
"number": "Too big, expected a number smaller than or equal to {{maximum}}.",
|
||||
"bytes": "Too big, expected less than or equal to {{params.maximum}} bytes."
|
||||
},
|
||||
"tooSmall": {
|
||||
"string": "Too short, expected more than or equal to {{minimum}} characters.",
|
||||
"number": "Too small, expected a number larger than or equal to {{minimum}}."
|
||||
},
|
||||
"invalidFormat": {
|
||||
"ipv4": "Невірний формат, потрібна IPv4-адреса.",
|
||||
"key": "Invalid format, expected a Base64 encoded pre-shared key (PSK)."
|
||||
},
|
||||
"invalidType": {
|
||||
"number": "Invalid type, expected a number."
|
||||
},
|
||||
"pskLength": {
|
||||
"0bit": "Ключ повинен бути пустим.",
|
||||
"8bit": "Key is required to be an 8 bit pre-shared key (PSK).",
|
||||
"128bit": "Key is required to be a 128 bit pre-shared key (PSK).",
|
||||
"256bit": "Key is required to be a 256 bit pre-shared key (PSK)."
|
||||
},
|
||||
"required": {
|
||||
"generic": "Це поле є обов'язковим.",
|
||||
"managed": "At least one admin key is requred if the node is managed.",
|
||||
"key": "Key is required."
|
||||
},
|
||||
"invalidOverrideFreq": {
|
||||
"number": "Invalid format, expected a value in the range 410-930 MHz or 0 (use default)."
|
||||
}
|
||||
},
|
||||
"yes": "Yes",
|
||||
"no": "No"
|
||||
}
|
||||
@@ -0,0 +1,458 @@
|
||||
{
|
||||
"page": {
|
||||
"title": "Налаштування",
|
||||
"tabUser": "Користувач",
|
||||
"tabChannels": "Канали",
|
||||
"tabBluetooth": "Bluetooth",
|
||||
"tabDevice": "Пристрій",
|
||||
"tabDisplay": "Дисплей",
|
||||
"tabLora": "LoRa",
|
||||
"tabNetwork": "Мережа",
|
||||
"tabPosition": "Position",
|
||||
"tabPower": "Живлення",
|
||||
"tabSecurity": "Безпека"
|
||||
},
|
||||
"sidebar": {
|
||||
"label": "Налаштування"
|
||||
},
|
||||
"device": {
|
||||
"title": "Налаштування пристрою",
|
||||
"description": "Settings for the device",
|
||||
"buttonPin": {
|
||||
"description": "Button pin override",
|
||||
"label": "Button Pin"
|
||||
},
|
||||
"buzzerPin": {
|
||||
"description": "Buzzer pin override",
|
||||
"label": "Buzzer Pin"
|
||||
},
|
||||
"disableTripleClick": {
|
||||
"description": "Disable triple click",
|
||||
"label": "Disable Triple Click"
|
||||
},
|
||||
"doubleTapAsButtonPress": {
|
||||
"description": "Treat double tap as button press",
|
||||
"label": "Double Tap as Button Press"
|
||||
},
|
||||
"ledHeartbeatDisabled": {
|
||||
"description": "Disable default blinking LED",
|
||||
"label": "LED Heartbeat Disabled"
|
||||
},
|
||||
"nodeInfoBroadcastInterval": {
|
||||
"description": "How often to broadcast node info",
|
||||
"label": "Node Info Broadcast Interval"
|
||||
},
|
||||
"posixTimezone": {
|
||||
"description": "The POSIX timezone string for the device",
|
||||
"label": "Часова зона POSIX"
|
||||
},
|
||||
"rebroadcastMode": {
|
||||
"description": "How to handle rebroadcasting",
|
||||
"label": "Rebroadcast Mode"
|
||||
},
|
||||
"role": {
|
||||
"description": "What role the device performs on the mesh",
|
||||
"label": "Роль"
|
||||
}
|
||||
},
|
||||
"bluetooth": {
|
||||
"title": "Налаштування Bluetooth",
|
||||
"description": "Settings for the Bluetooth module",
|
||||
"note": "Note: Some devices (ESP32) cannot use both Bluetooth and WiFi at the same time.",
|
||||
"enabled": {
|
||||
"description": "Увімкнути або вимкнути Bluetooth",
|
||||
"label": "Увімкнено"
|
||||
},
|
||||
"pairingMode": {
|
||||
"description": "Pin selection behaviour.",
|
||||
"label": "Pairing mode"
|
||||
},
|
||||
"pin": {
|
||||
"description": "Pin to use when pairing",
|
||||
"label": "Pin"
|
||||
}
|
||||
},
|
||||
"display": {
|
||||
"description": "Settings for the device display",
|
||||
"title": "Display Settings",
|
||||
"headingBold": {
|
||||
"description": "Bolden the heading text",
|
||||
"label": "Bold Heading"
|
||||
},
|
||||
"carouselDelay": {
|
||||
"description": "How fast to cycle through windows",
|
||||
"label": "Carousel Delay"
|
||||
},
|
||||
"compassNorthTop": {
|
||||
"description": "Fix north to the top of compass",
|
||||
"label": "Compass North Top"
|
||||
},
|
||||
"displayMode": {
|
||||
"description": "Screen layout variant",
|
||||
"label": "Display Mode"
|
||||
},
|
||||
"displayUnits": {
|
||||
"description": "Display metric or imperial units",
|
||||
"label": "Display Units"
|
||||
},
|
||||
"flipScreen": {
|
||||
"description": "Flip display 180 degrees",
|
||||
"label": "Flip Screen"
|
||||
},
|
||||
"gpsDisplayUnits": {
|
||||
"description": "Coordinate display format",
|
||||
"label": "GPS Display Units"
|
||||
},
|
||||
"oledType": {
|
||||
"description": "Type of OLED screen attached to the device",
|
||||
"label": "OLED Type"
|
||||
},
|
||||
"screenTimeout": {
|
||||
"description": "Turn off the display after this long",
|
||||
"label": "Screen Timeout"
|
||||
},
|
||||
"twelveHourClock": {
|
||||
"description": "Use 12-hour clock format",
|
||||
"label": "12-Hour Clock"
|
||||
},
|
||||
"wakeOnTapOrMotion": {
|
||||
"description": "Wake the device on tap or motion",
|
||||
"label": "Wake on Tap or Motion"
|
||||
}
|
||||
},
|
||||
"lora": {
|
||||
"title": "Mesh Settings",
|
||||
"description": "Settings for the LoRa mesh",
|
||||
"bandwidth": {
|
||||
"description": "Channel bandwidth in kHz",
|
||||
"label": "Bandwidth"
|
||||
},
|
||||
"boostedRxGain": {
|
||||
"description": "Boosted RX gain",
|
||||
"label": "Boosted RX Gain"
|
||||
},
|
||||
"codingRate": {
|
||||
"description": "The denominator of the coding rate",
|
||||
"label": "Coding Rate"
|
||||
},
|
||||
"frequencyOffset": {
|
||||
"description": "Frequency offset to correct for crystal calibration errors",
|
||||
"label": "Frequency Offset"
|
||||
},
|
||||
"frequencySlot": {
|
||||
"description": "LoRa frequency channel number",
|
||||
"label": "Frequency Slot"
|
||||
},
|
||||
"hopLimit": {
|
||||
"description": "Maximum number of hops",
|
||||
"label": "Hop Limit"
|
||||
},
|
||||
"ignoreMqtt": {
|
||||
"description": "Don't forward MQTT messages over the mesh",
|
||||
"label": "Ігнорувати MQTT"
|
||||
},
|
||||
"modemPreset": {
|
||||
"description": "Modem preset to use",
|
||||
"label": "Modem Preset"
|
||||
},
|
||||
"okToMqtt": {
|
||||
"description": "When set to true, this configuration indicates that the user approves the packet to be uploaded to MQTT. If set to false, remote nodes are requested not to forward packets to MQTT",
|
||||
"label": "OK to MQTT"
|
||||
},
|
||||
"overrideDutyCycle": {
|
||||
"description": "Override Duty Cycle",
|
||||
"label": "Override Duty Cycle"
|
||||
},
|
||||
"overrideFrequency": {
|
||||
"description": "Override frequency",
|
||||
"label": "Override Frequency"
|
||||
},
|
||||
"region": {
|
||||
"description": "Sets the region for your node",
|
||||
"label": "Регіон"
|
||||
},
|
||||
"spreadingFactor": {
|
||||
"description": "Indicates the number of chirps per symbol",
|
||||
"label": "Spreading Factor"
|
||||
},
|
||||
"transmitEnabled": {
|
||||
"description": "Enable/Disable transmit (TX) from the LoRa radio",
|
||||
"label": "Transmit Enabled"
|
||||
},
|
||||
"transmitPower": {
|
||||
"description": "Max transmit power",
|
||||
"label": "Transmit Power"
|
||||
},
|
||||
"usePreset": {
|
||||
"description": "Use one of the predefined modem presets",
|
||||
"label": "Use Preset"
|
||||
},
|
||||
"meshSettings": {
|
||||
"description": "Settings for the LoRa mesh",
|
||||
"label": "Mesh Settings"
|
||||
},
|
||||
"waveformSettings": {
|
||||
"description": "Settings for the LoRa waveform",
|
||||
"label": "Waveform Settings"
|
||||
},
|
||||
"radioSettings": {
|
||||
"label": "Radio Settings",
|
||||
"description": "Settings for the LoRa radio"
|
||||
}
|
||||
},
|
||||
"network": {
|
||||
"title": "Налаштування WiFi",
|
||||
"description": "WiFi radio configuration",
|
||||
"note": "Note: Some devices (ESP32) cannot use both Bluetooth and WiFi at the same time.",
|
||||
"addressMode": {
|
||||
"description": "Address assignment selection",
|
||||
"label": "Address Mode"
|
||||
},
|
||||
"dns": {
|
||||
"description": "DNS-сервер",
|
||||
"label": "DNS"
|
||||
},
|
||||
"ethernetEnabled": {
|
||||
"description": "Enable or disable the Ethernet port",
|
||||
"label": "Увімкнено"
|
||||
},
|
||||
"gateway": {
|
||||
"description": "Default Gateway",
|
||||
"label": "Шлюз"
|
||||
},
|
||||
"ip": {
|
||||
"description": "IP Address",
|
||||
"label": "IP-адреса"
|
||||
},
|
||||
"psk": {
|
||||
"description": "Network password",
|
||||
"label": "PSK"
|
||||
},
|
||||
"ssid": {
|
||||
"description": "Network name",
|
||||
"label": "SSID"
|
||||
},
|
||||
"subnet": {
|
||||
"description": "Маска підмережі",
|
||||
"label": "Підмережа"
|
||||
},
|
||||
"wifiEnabled": {
|
||||
"description": "Увімкнути або вимкнути WiFi радіо",
|
||||
"label": "Увімкнено"
|
||||
},
|
||||
"meshViaUdp": {
|
||||
"label": "Mesh via UDP"
|
||||
},
|
||||
"ntpServer": {
|
||||
"label": "NTP-сервер"
|
||||
},
|
||||
"rsyslogServer": {
|
||||
"label": "Rsyslog-сервер"
|
||||
},
|
||||
"ethernetConfigSettings": {
|
||||
"description": "Ethernet port configuration",
|
||||
"label": "Ethernet Config"
|
||||
},
|
||||
"ipConfigSettings": {
|
||||
"description": "IP configuration",
|
||||
"label": "IP Config"
|
||||
},
|
||||
"ntpConfigSettings": {
|
||||
"description": "Налаштування NTP",
|
||||
"label": "NTP Config"
|
||||
},
|
||||
"rsyslogConfigSettings": {
|
||||
"description": "Rsyslog configuration",
|
||||
"label": "Налаштування Rsyslog"
|
||||
},
|
||||
"udpConfigSettings": {
|
||||
"description": "UDP over Mesh configuration",
|
||||
"label": "Налаштування UDP"
|
||||
}
|
||||
},
|
||||
"position": {
|
||||
"title": "Position Settings",
|
||||
"description": "Settings for the position module",
|
||||
"broadcastInterval": {
|
||||
"description": "How often your position is sent out over the mesh",
|
||||
"label": "Broadcast Interval"
|
||||
},
|
||||
"enablePin": {
|
||||
"description": "GPS module enable pin override",
|
||||
"label": "Enable Pin"
|
||||
},
|
||||
"fixedPosition": {
|
||||
"description": "Don't report GPS position, but a manually-specified one",
|
||||
"label": "Fixed Position"
|
||||
},
|
||||
"gpsMode": {
|
||||
"description": "Configure whether device GPS is Enabled, Disabled, or Not Present",
|
||||
"label": "GPS Mode"
|
||||
},
|
||||
"gpsUpdateInterval": {
|
||||
"description": "How often a GPS fix should be acquired",
|
||||
"label": "GPS Update Interval"
|
||||
},
|
||||
"positionFlags": {
|
||||
"description": "Optional fields to include when assembling position messages. The more fields are selected, the larger the message will be leading to longer airtime usage and a higher risk of packet loss.",
|
||||
"label": "Position Flags"
|
||||
},
|
||||
"receivePin": {
|
||||
"description": "GPS module RX pin override",
|
||||
"label": "Receive Pin"
|
||||
},
|
||||
"smartPositionEnabled": {
|
||||
"description": "Only send position when there has been a meaningful change in location",
|
||||
"label": "Enable Smart Position"
|
||||
},
|
||||
"smartPositionMinDistance": {
|
||||
"description": "Minimum distance (in meters) that must be traveled before a position update is sent",
|
||||
"label": "Smart Position Minimum Distance"
|
||||
},
|
||||
"smartPositionMinInterval": {
|
||||
"description": "Minimum interval (in seconds) that must pass before a position update is sent",
|
||||
"label": "Smart Position Minimum Interval"
|
||||
},
|
||||
"transmitPin": {
|
||||
"description": "GPS module TX pin override",
|
||||
"label": "Transmit Pin"
|
||||
},
|
||||
"intervalsSettings": {
|
||||
"description": "How often to send position updates",
|
||||
"label": "Intervals"
|
||||
},
|
||||
"flags": {
|
||||
"placeholder": "Select position flags...",
|
||||
"altitude": "Висота",
|
||||
"altitudeGeoidalSeparation": "Altitude Geoidal Separation",
|
||||
"altitudeMsl": "Altitude is Mean Sea Level",
|
||||
"dop": "Dilution of precision (DOP) PDOP used by default",
|
||||
"hdopVdop": "If DOP is set, use HDOP / VDOP values instead of PDOP",
|
||||
"numSatellites": "Number of satellites",
|
||||
"sequenceNumber": "Sequence number",
|
||||
"timestamp": "Мітка часу",
|
||||
"unset": "Скинути",
|
||||
"vehicleHeading": "Vehicle heading",
|
||||
"vehicleSpeed": "Vehicle speed"
|
||||
}
|
||||
},
|
||||
"power": {
|
||||
"adcMultiplierOverride": {
|
||||
"description": "Used for tweaking battery voltage reading",
|
||||
"label": "ADC Multiplier Override ratio"
|
||||
},
|
||||
"ina219Address": {
|
||||
"description": "Address of the INA219 battery monitor",
|
||||
"label": "INA219 Address"
|
||||
},
|
||||
"lightSleepDuration": {
|
||||
"description": "How long the device will be in light sleep for",
|
||||
"label": "Light Sleep Duration"
|
||||
},
|
||||
"minimumWakeTime": {
|
||||
"description": "Minimum amount of time the device will stay awake for after receiving a packet",
|
||||
"label": "Minimum Wake Time"
|
||||
},
|
||||
"noConnectionBluetoothDisabled": {
|
||||
"description": "If the device does not receive a Bluetooth connection, the BLE radio will be disabled after this long",
|
||||
"label": "No Connection Bluetooth Disabled"
|
||||
},
|
||||
"powerSavingEnabled": {
|
||||
"description": "Select if powered from a low-current source (i.e. solar), to minimize power consumption as much as possible.",
|
||||
"label": "Увімкнути енергоощадний режим"
|
||||
},
|
||||
"shutdownOnBatteryDelay": {
|
||||
"description": "Automatically shutdown node after this long when on battery, 0 for indefinite",
|
||||
"label": "Shutdown on battery delay"
|
||||
},
|
||||
"superDeepSleepDuration": {
|
||||
"description": "How long the device will be in super deep sleep for",
|
||||
"label": "Super Deep Sleep Duration"
|
||||
},
|
||||
"powerConfigSettings": {
|
||||
"description": "Settings for the power module",
|
||||
"label": "Налаштування живлення"
|
||||
},
|
||||
"sleepSettings": {
|
||||
"description": "Sleep settings for the power module",
|
||||
"label": "Налаштування режиму сну"
|
||||
}
|
||||
},
|
||||
"security": {
|
||||
"description": "Settings for the Security configuration",
|
||||
"title": "Налаштування безпеки",
|
||||
"button_backupKey": "Backup Key",
|
||||
"adminChannelEnabled": {
|
||||
"description": "Allow incoming device control over the insecure legacy admin channel",
|
||||
"label": "Allow Legacy Admin"
|
||||
},
|
||||
"enableDebugLogApi": {
|
||||
"description": "Output live debug logging over serial, view and export position-redacted device logs over Bluetooth",
|
||||
"label": "Enable Debug Log API"
|
||||
},
|
||||
"managed": {
|
||||
"description": "If enabled, device configuration options are only able to be changed remotely by a Remote Admin node via admin messages. Do not enable this option unless at least one suitable Remote Admin node has been setup, and the public key is stored in one of the fields above.",
|
||||
"label": "Managed"
|
||||
},
|
||||
"privateKey": {
|
||||
"description": "Used to create a shared key with a remote device",
|
||||
"label": "Private Key"
|
||||
},
|
||||
"publicKey": {
|
||||
"description": "Sent out to other nodes on the mesh to allow them to compute a shared secret key",
|
||||
"label": "Public Key"
|
||||
},
|
||||
"primaryAdminKey": {
|
||||
"description": "The primary public key authorized to send admin messages to this node",
|
||||
"label": "Primary Admin Key"
|
||||
},
|
||||
"secondaryAdminKey": {
|
||||
"description": "The secondary public key authorized to send admin messages to this node",
|
||||
"label": "Secondary Admin Key"
|
||||
},
|
||||
"serialOutputEnabled": {
|
||||
"description": "Serial Console over the Stream API",
|
||||
"label": "Serial Output Enabled"
|
||||
},
|
||||
"tertiaryAdminKey": {
|
||||
"description": "The tertiary public key authorized to send admin messages to this node",
|
||||
"label": "Tertiary Admin Key"
|
||||
},
|
||||
"adminSettings": {
|
||||
"description": "Settings for Admin",
|
||||
"label": "Admin Settings"
|
||||
},
|
||||
"loggingSettings": {
|
||||
"description": "Settings for Logging",
|
||||
"label": "Logging Settings"
|
||||
}
|
||||
},
|
||||
"user": {
|
||||
"title": "User Settings",
|
||||
"description": "Configure your device name and identity settings",
|
||||
"longName": {
|
||||
"label": "Довга назва",
|
||||
"description": "Your full display name (1-40 characters)",
|
||||
"validation": {
|
||||
"min": "Long name must be at least 1 character",
|
||||
"max": "Long name must be at most 40 characters"
|
||||
}
|
||||
},
|
||||
"shortName": {
|
||||
"label": "Коротка назва",
|
||||
"description": "Your abbreviated name (2-4 characters)",
|
||||
"validation": {
|
||||
"min": "Short name must be at least 2 characters",
|
||||
"max": "Short name must be at most 4 characters"
|
||||
}
|
||||
},
|
||||
"isUnmessageable": {
|
||||
"label": "Unmessageable",
|
||||
"description": "Used to identify unmonitored or infrastructure nodes so that messaging is not available to nodes that will never respond."
|
||||
},
|
||||
"isLicensed": {
|
||||
"label": "Licensed amateur radio (HAM)",
|
||||
"description": "Enable if you are a licensed amateur radio operator, enabling this option disables encryption and is not compatible with the default Meshtastic network."
|
||||
}
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,34 @@
|
||||
{
|
||||
"page": {
|
||||
"title": "Connect to a Meshtastic device",
|
||||
"description": "Add a device connection via HTTP, Bluetooth, or Serial. Your saved connections will be saved in your browser."
|
||||
},
|
||||
"connectionType_ble": "BLE",
|
||||
"connectionType_serial": "Серійний порт",
|
||||
"connectionType_network": "Мережа",
|
||||
"deleteConnection": "Delete connection",
|
||||
"areYouSure": "This will remove {{name}}. You canot undo this action.",
|
||||
"moreActions": "More actions",
|
||||
"noConnections": {
|
||||
"title": "No connections yet.",
|
||||
"description": "Create your first connection. It will connect immediately and be saved for later."
|
||||
},
|
||||
"lastConnectedAt": "Last connected: {{date}}",
|
||||
"neverConnected": "Never connected",
|
||||
"toasts": {
|
||||
"connected": "Connected",
|
||||
"nowConnected": "{{name}} is now connected",
|
||||
"nowDisconnected": "{{name}} are now disconnecte",
|
||||
"disconnected": "Відключено",
|
||||
"failed": "Failed to connect",
|
||||
"checkConnetion": "Check your device or settings and try again",
|
||||
"defaultSet": "Default set",
|
||||
"defaultConnection": "Default connection is now {{nameisconnected}}",
|
||||
"deleted": "Deleted",
|
||||
"deletedByName": "{{name}} was removed",
|
||||
"pickConnectionAgain": "Could not connect. You may need to reselect the device/port.",
|
||||
"added": "Connection added",
|
||||
"savedByName": "{{name}} saved.",
|
||||
"savedCantConnect": "The connection was saved but could not connect."
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,428 @@
|
||||
{
|
||||
"page": {
|
||||
"title": "Налаштування",
|
||||
"tabBluetooth": "Bluetooth",
|
||||
"tabDevice": "Пристрій",
|
||||
"tabDisplay": "Дисплей",
|
||||
"tabLora": "LoRa",
|
||||
"tabNetwork": "Мережа",
|
||||
"tabPosition": "Position",
|
||||
"tabPower": "Живлення",
|
||||
"tabSecurity": "Безпека"
|
||||
},
|
||||
"sidebar": {
|
||||
"label": "Модулі"
|
||||
},
|
||||
"device": {
|
||||
"title": "Налаштування пристрою",
|
||||
"description": "Settings for the device",
|
||||
"buttonPin": {
|
||||
"description": "Button pin override",
|
||||
"label": "Button Pin"
|
||||
},
|
||||
"buzzerPin": {
|
||||
"description": "Buzzer pin override",
|
||||
"label": "Buzzer Pin"
|
||||
},
|
||||
"disableTripleClick": {
|
||||
"description": "Disable triple click",
|
||||
"label": "Disable Triple Click"
|
||||
},
|
||||
"doubleTapAsButtonPress": {
|
||||
"description": "Treat double tap as button press",
|
||||
"label": "Double Tap as Button Press"
|
||||
},
|
||||
"ledHeartbeatDisabled": {
|
||||
"description": "Disable default blinking LED",
|
||||
"label": "LED Heartbeat Disabled"
|
||||
},
|
||||
"nodeInfoBroadcastInterval": {
|
||||
"description": "How often to broadcast node info",
|
||||
"label": "Node Info Broadcast Interval"
|
||||
},
|
||||
"posixTimezone": {
|
||||
"description": "The POSIX timezone string for the device",
|
||||
"label": "Часова зона POSIX"
|
||||
},
|
||||
"rebroadcastMode": {
|
||||
"description": "How to handle rebroadcasting",
|
||||
"label": "Rebroadcast Mode"
|
||||
},
|
||||
"role": {
|
||||
"description": "What role the device performs on the mesh",
|
||||
"label": "Роль"
|
||||
}
|
||||
},
|
||||
"bluetooth": {
|
||||
"title": "Налаштування Bluetooth",
|
||||
"description": "Settings for the Bluetooth module",
|
||||
"note": "Note: Some devices (ESP32) cannot use both Bluetooth and WiFi at the same time.",
|
||||
"enabled": {
|
||||
"description": "Увімкнути або вимкнути Bluetooth",
|
||||
"label": "Увімкнено"
|
||||
},
|
||||
"pairingMode": {
|
||||
"description": "Pin selection behaviour.",
|
||||
"label": "Pairing mode"
|
||||
},
|
||||
"pin": {
|
||||
"description": "Pin to use when pairing",
|
||||
"label": "Pin"
|
||||
}
|
||||
},
|
||||
"display": {
|
||||
"description": "Settings for the device display",
|
||||
"title": "Display Settings",
|
||||
"headingBold": {
|
||||
"description": "Bolden the heading text",
|
||||
"label": "Bold Heading"
|
||||
},
|
||||
"carouselDelay": {
|
||||
"description": "How fast to cycle through windows",
|
||||
"label": "Carousel Delay"
|
||||
},
|
||||
"compassNorthTop": {
|
||||
"description": "Fix north to the top of compass",
|
||||
"label": "Compass North Top"
|
||||
},
|
||||
"displayMode": {
|
||||
"description": "Screen layout variant",
|
||||
"label": "Display Mode"
|
||||
},
|
||||
"displayUnits": {
|
||||
"description": "Display metric or imperial units",
|
||||
"label": "Display Units"
|
||||
},
|
||||
"flipScreen": {
|
||||
"description": "Flip display 180 degrees",
|
||||
"label": "Flip Screen"
|
||||
},
|
||||
"gpsDisplayUnits": {
|
||||
"description": "Coordinate display format",
|
||||
"label": "GPS Display Units"
|
||||
},
|
||||
"oledType": {
|
||||
"description": "Type of OLED screen attached to the device",
|
||||
"label": "OLED Type"
|
||||
},
|
||||
"screenTimeout": {
|
||||
"description": "Turn off the display after this long",
|
||||
"label": "Screen Timeout"
|
||||
},
|
||||
"twelveHourClock": {
|
||||
"description": "Use 12-hour clock format",
|
||||
"label": "12-Hour Clock"
|
||||
},
|
||||
"wakeOnTapOrMotion": {
|
||||
"description": "Wake the device on tap or motion",
|
||||
"label": "Wake on Tap or Motion"
|
||||
}
|
||||
},
|
||||
"lora": {
|
||||
"title": "Mesh Settings",
|
||||
"description": "Settings for the LoRa mesh",
|
||||
"bandwidth": {
|
||||
"description": "Channel bandwidth in kHz",
|
||||
"label": "Bandwidth"
|
||||
},
|
||||
"boostedRxGain": {
|
||||
"description": "Boosted RX gain",
|
||||
"label": "Boosted RX Gain"
|
||||
},
|
||||
"codingRate": {
|
||||
"description": "The denominator of the coding rate",
|
||||
"label": "Coding Rate"
|
||||
},
|
||||
"frequencyOffset": {
|
||||
"description": "Frequency offset to correct for crystal calibration errors",
|
||||
"label": "Frequency Offset"
|
||||
},
|
||||
"frequencySlot": {
|
||||
"description": "LoRa frequency channel number",
|
||||
"label": "Frequency Slot"
|
||||
},
|
||||
"hopLimit": {
|
||||
"description": "Maximum number of hops",
|
||||
"label": "Hop Limit"
|
||||
},
|
||||
"ignoreMqtt": {
|
||||
"description": "Don't forward MQTT messages over the mesh",
|
||||
"label": "Ігнорувати MQTT"
|
||||
},
|
||||
"modemPreset": {
|
||||
"description": "Modem preset to use",
|
||||
"label": "Modem Preset"
|
||||
},
|
||||
"okToMqtt": {
|
||||
"description": "When set to true, this configuration indicates that the user approves the packet to be uploaded to MQTT. If set to false, remote nodes are requested not to forward packets to MQTT",
|
||||
"label": "OK to MQTT"
|
||||
},
|
||||
"overrideDutyCycle": {
|
||||
"description": "Override Duty Cycle",
|
||||
"label": "Override Duty Cycle"
|
||||
},
|
||||
"overrideFrequency": {
|
||||
"description": "Override frequency",
|
||||
"label": "Override Frequency"
|
||||
},
|
||||
"region": {
|
||||
"description": "Sets the region for your node",
|
||||
"label": "Регіон"
|
||||
},
|
||||
"spreadingFactor": {
|
||||
"description": "Indicates the number of chirps per symbol",
|
||||
"label": "Spreading Factor"
|
||||
},
|
||||
"transmitEnabled": {
|
||||
"description": "Enable/Disable transmit (TX) from the LoRa radio",
|
||||
"label": "Transmit Enabled"
|
||||
},
|
||||
"transmitPower": {
|
||||
"description": "Max transmit power",
|
||||
"label": "Transmit Power"
|
||||
},
|
||||
"usePreset": {
|
||||
"description": "Use one of the predefined modem presets",
|
||||
"label": "Use Preset"
|
||||
},
|
||||
"meshSettings": {
|
||||
"description": "Settings for the LoRa mesh",
|
||||
"label": "Mesh Settings"
|
||||
},
|
||||
"waveformSettings": {
|
||||
"description": "Settings for the LoRa waveform",
|
||||
"label": "Waveform Settings"
|
||||
},
|
||||
"radioSettings": {
|
||||
"label": "Radio Settings",
|
||||
"description": "Settings for the LoRa radio"
|
||||
}
|
||||
},
|
||||
"network": {
|
||||
"title": "Налаштування WiFi",
|
||||
"description": "WiFi radio configuration",
|
||||
"note": "Note: Some devices (ESP32) cannot use both Bluetooth and WiFi at the same time.",
|
||||
"addressMode": {
|
||||
"description": "Address assignment selection",
|
||||
"label": "Address Mode"
|
||||
},
|
||||
"dns": {
|
||||
"description": "DNS-сервер",
|
||||
"label": "DNS"
|
||||
},
|
||||
"ethernetEnabled": {
|
||||
"description": "Enable or disable the Ethernet port",
|
||||
"label": "Увімкнено"
|
||||
},
|
||||
"gateway": {
|
||||
"description": "Default Gateway",
|
||||
"label": "Шлюз"
|
||||
},
|
||||
"ip": {
|
||||
"description": "IP Address",
|
||||
"label": "IP-адреса"
|
||||
},
|
||||
"psk": {
|
||||
"description": "Network password",
|
||||
"label": "PSK"
|
||||
},
|
||||
"ssid": {
|
||||
"description": "Network name",
|
||||
"label": "SSID"
|
||||
},
|
||||
"subnet": {
|
||||
"description": "Маска підмережі",
|
||||
"label": "Підмережа"
|
||||
},
|
||||
"wifiEnabled": {
|
||||
"description": "Увімкнути або вимкнути WiFi радіо",
|
||||
"label": "Увімкнено"
|
||||
},
|
||||
"meshViaUdp": {
|
||||
"label": "Mesh via UDP"
|
||||
},
|
||||
"ntpServer": {
|
||||
"label": "NTP-сервер"
|
||||
},
|
||||
"rsyslogServer": {
|
||||
"label": "Rsyslog-сервер"
|
||||
},
|
||||
"ethernetConfigSettings": {
|
||||
"description": "Ethernet port configuration",
|
||||
"label": "Ethernet Config"
|
||||
},
|
||||
"ipConfigSettings": {
|
||||
"description": "IP configuration",
|
||||
"label": "IP Config"
|
||||
},
|
||||
"ntpConfigSettings": {
|
||||
"description": "Налаштування NTP",
|
||||
"label": "NTP Config"
|
||||
},
|
||||
"rsyslogConfigSettings": {
|
||||
"description": "Rsyslog configuration",
|
||||
"label": "Налаштування Rsyslog"
|
||||
},
|
||||
"udpConfigSettings": {
|
||||
"description": "UDP over Mesh configuration",
|
||||
"label": "Налаштування UDP"
|
||||
}
|
||||
},
|
||||
"position": {
|
||||
"title": "Position Settings",
|
||||
"description": "Settings for the position module",
|
||||
"broadcastInterval": {
|
||||
"description": "How often your position is sent out over the mesh",
|
||||
"label": "Broadcast Interval"
|
||||
},
|
||||
"enablePin": {
|
||||
"description": "GPS module enable pin override",
|
||||
"label": "Enable Pin"
|
||||
},
|
||||
"fixedPosition": {
|
||||
"description": "Don't report GPS position, but a manually-specified one",
|
||||
"label": "Fixed Position"
|
||||
},
|
||||
"gpsMode": {
|
||||
"description": "Configure whether device GPS is Enabled, Disabled, or Not Present",
|
||||
"label": "GPS Mode"
|
||||
},
|
||||
"gpsUpdateInterval": {
|
||||
"description": "How often a GPS fix should be acquired",
|
||||
"label": "GPS Update Interval"
|
||||
},
|
||||
"positionFlags": {
|
||||
"description": "Optional fields to include when assembling position messages. The more fields are selected, the larger the message will be leading to longer airtime usage and a higher risk of packet loss.",
|
||||
"label": "Position Flags"
|
||||
},
|
||||
"receivePin": {
|
||||
"description": "GPS module RX pin override",
|
||||
"label": "Receive Pin"
|
||||
},
|
||||
"smartPositionEnabled": {
|
||||
"description": "Only send position when there has been a meaningful change in location",
|
||||
"label": "Enable Smart Position"
|
||||
},
|
||||
"smartPositionMinDistance": {
|
||||
"description": "Minimum distance (in meters) that must be traveled before a position update is sent",
|
||||
"label": "Smart Position Minimum Distance"
|
||||
},
|
||||
"smartPositionMinInterval": {
|
||||
"description": "Minimum interval (in seconds) that must pass before a position update is sent",
|
||||
"label": "Smart Position Minimum Interval"
|
||||
},
|
||||
"transmitPin": {
|
||||
"description": "GPS module TX pin override",
|
||||
"label": "Transmit Pin"
|
||||
},
|
||||
"intervalsSettings": {
|
||||
"description": "How often to send position updates",
|
||||
"label": "Intervals"
|
||||
},
|
||||
"flags": {
|
||||
"placeholder": "Select position flags...",
|
||||
"altitude": "Висота",
|
||||
"altitudeGeoidalSeparation": "Altitude Geoidal Separation",
|
||||
"altitudeMsl": "Altitude is Mean Sea Level",
|
||||
"dop": "Dilution of precision (DOP) PDOP used by default",
|
||||
"hdopVdop": "If DOP is set, use HDOP / VDOP values instead of PDOP",
|
||||
"numSatellites": "Number of satellites",
|
||||
"sequenceNumber": "Sequence number",
|
||||
"timestamp": "Мітка часу",
|
||||
"unset": "Скинути",
|
||||
"vehicleHeading": "Vehicle heading",
|
||||
"vehicleSpeed": "Vehicle speed"
|
||||
}
|
||||
},
|
||||
"power": {
|
||||
"adcMultiplierOverride": {
|
||||
"description": "Used for tweaking battery voltage reading",
|
||||
"label": "ADC Multiplier Override ratio"
|
||||
},
|
||||
"ina219Address": {
|
||||
"description": "Address of the INA219 battery monitor",
|
||||
"label": "INA219 Address"
|
||||
},
|
||||
"lightSleepDuration": {
|
||||
"description": "How long the device will be in light sleep for",
|
||||
"label": "Light Sleep Duration"
|
||||
},
|
||||
"minimumWakeTime": {
|
||||
"description": "Minimum amount of time the device will stay awake for after receiving a packet",
|
||||
"label": "Minimum Wake Time"
|
||||
},
|
||||
"noConnectionBluetoothDisabled": {
|
||||
"description": "If the device does not receive a Bluetooth connection, the BLE radio will be disabled after this long",
|
||||
"label": "No Connection Bluetooth Disabled"
|
||||
},
|
||||
"powerSavingEnabled": {
|
||||
"description": "Select if powered from a low-current source (i.e. solar), to minimize power consumption as much as possible.",
|
||||
"label": "Увімкнути енергоощадний режим"
|
||||
},
|
||||
"shutdownOnBatteryDelay": {
|
||||
"description": "Automatically shutdown node after this long when on battery, 0 for indefinite",
|
||||
"label": "Shutdown on battery delay"
|
||||
},
|
||||
"superDeepSleepDuration": {
|
||||
"description": "How long the device will be in super deep sleep for",
|
||||
"label": "Super Deep Sleep Duration"
|
||||
},
|
||||
"powerConfigSettings": {
|
||||
"description": "Settings for the power module",
|
||||
"label": "Налаштування живлення"
|
||||
},
|
||||
"sleepSettings": {
|
||||
"description": "Sleep settings for the power module",
|
||||
"label": "Налаштування режиму сну"
|
||||
}
|
||||
},
|
||||
"security": {
|
||||
"description": "Settings for the Security configuration",
|
||||
"title": "Налаштування безпеки",
|
||||
"button_backupKey": "Backup Key",
|
||||
"adminChannelEnabled": {
|
||||
"description": "Allow incoming device control over the insecure legacy admin channel",
|
||||
"label": "Allow Legacy Admin"
|
||||
},
|
||||
"enableDebugLogApi": {
|
||||
"description": "Output live debug logging over serial, view and export position-redacted device logs over Bluetooth",
|
||||
"label": "Enable Debug Log API"
|
||||
},
|
||||
"managed": {
|
||||
"description": "If enabled, device configuration options are only able to be changed remotely by a Remote Admin node via admin messages. Do not enable this option unless at least one suitable Remote Admin node has been setup, and the public key is stored in one of the fields above.",
|
||||
"label": "Managed"
|
||||
},
|
||||
"privateKey": {
|
||||
"description": "Used to create a shared key with a remote device",
|
||||
"label": "Private Key"
|
||||
},
|
||||
"publicKey": {
|
||||
"description": "Sent out to other nodes on the mesh to allow them to compute a shared secret key",
|
||||
"label": "Public Key"
|
||||
},
|
||||
"primaryAdminKey": {
|
||||
"description": "The primary public key authorized to send admin messages to this node",
|
||||
"label": "Primary Admin Key"
|
||||
},
|
||||
"secondaryAdminKey": {
|
||||
"description": "The secondary public key authorized to send admin messages to this node",
|
||||
"label": "Secondary Admin Key"
|
||||
},
|
||||
"serialOutputEnabled": {
|
||||
"description": "Serial Console over the Stream API",
|
||||
"label": "Serial Output Enabled"
|
||||
},
|
||||
"tertiaryAdminKey": {
|
||||
"description": "The tertiary public key authorized to send admin messages to this node",
|
||||
"label": "Tertiary Admin Key"
|
||||
},
|
||||
"adminSettings": {
|
||||
"description": "Settings for Admin",
|
||||
"label": "Admin Settings"
|
||||
},
|
||||
"loggingSettings": {
|
||||
"description": "Settings for Logging",
|
||||
"label": "Logging Settings"
|
||||
}
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,238 @@
|
||||
{
|
||||
"deleteMessages": {
|
||||
"description": "This action will clear all message history. This cannot be undone. Are you sure you want to continue?",
|
||||
"title": "Очистити всі повідомлення"
|
||||
},
|
||||
"import": {
|
||||
"description": "The current LoRa configuration will be overridden.",
|
||||
"error": {
|
||||
"invalidUrl": "Invalid Meshtastic URL"
|
||||
},
|
||||
"channelPrefix": "Канал: ",
|
||||
"primary": "Primary ",
|
||||
"doNotImport": "No not import",
|
||||
"channelName": "Ім'я",
|
||||
"channelSlot": "Slot",
|
||||
"channelSetUrl": "Channel Set/QR Code URL",
|
||||
"useLoraConfig": "Import LoRa Config",
|
||||
"presetDescription": "The current LoRa Config will be replaced.",
|
||||
"title": "Import Channel Set"
|
||||
},
|
||||
"locationResponse": {
|
||||
"title": "Розташування: {{identifier}}",
|
||||
"altitude": "Висота: ",
|
||||
"coordinates": "Координати: ",
|
||||
"noCoordinates": "No Coordinates"
|
||||
},
|
||||
"pkiRegenerateDialog": {
|
||||
"title": "Regenerate Pre-Shared Key?",
|
||||
"description": "Are you sure you want to regenerate the pre-shared key?",
|
||||
"regenerate": "Перегенерувати"
|
||||
},
|
||||
"addConnection": {
|
||||
"title": "Add connection",
|
||||
"description": "Choose a connection type and fill in the details",
|
||||
"validation": {
|
||||
"requiresWebBluetooth": "This connection type requires <0>Web Bluetooth</0>. Please use a supported browser, like Chrome or Edge.",
|
||||
"requiresWebSerial": "This connection type requires <0>Web Serial</0>. Please use a supported browser, like Chrome or Edge.",
|
||||
"requiresSecureContext": "This application requires a <0>secure context</0>. Please connect using HTTPS or localhost.",
|
||||
"additionallyRequiresSecureContext": "Additionally, it requires a <0>secure context</0>. Please connect using HTTPS or localhost."
|
||||
},
|
||||
"bluetoothConnection": {
|
||||
"namePlaceholder": "My Bluetooth Node",
|
||||
"supported": {
|
||||
"title": "Web Bluetooth supported"
|
||||
},
|
||||
"notSupported": {
|
||||
"title": "Web Bluetooth not supported",
|
||||
"description": "Your browser or device does not support Web Bluetooth"
|
||||
},
|
||||
"short": "BT: {{deviceName}}",
|
||||
"long": "Bluetooth Device",
|
||||
"device": "Пристрій",
|
||||
"selectDevice": "Select device",
|
||||
"selected": "Bluetooth device selected",
|
||||
"notSelected": "No device selected",
|
||||
"helperText": "Uses the Meshtastic Bluetooth service for discovery."
|
||||
},
|
||||
"serialConnection": {
|
||||
"namePlaceholder": "My Serial Node",
|
||||
"helperText": "Selecting a port grants permission so the app can open it to connect.",
|
||||
"supported": {
|
||||
"title": "Web Serial supported"
|
||||
},
|
||||
"notSupported": {
|
||||
"title": "Web Serial not supported",
|
||||
"description": "Your browser or device does not support Web Serial"
|
||||
},
|
||||
"portSelected": {
|
||||
"title": "Serial port selected",
|
||||
"description": "Port permissions granted."
|
||||
},
|
||||
"port": "Port",
|
||||
"selectPort": "Select port",
|
||||
"deviceName": "USB {{vendorId}}:{{productId}}",
|
||||
"notSelected": "No port selected"
|
||||
},
|
||||
"httpConnection": {
|
||||
"namePlaceholder": "My HTTP Node",
|
||||
"inputPlaceholder": "192.168.1.10 or meshtastic.local",
|
||||
"heading": "URL or IP",
|
||||
"useHttps": "Use HTTPS",
|
||||
"invalidUrl": {
|
||||
"title": "Invalid URL",
|
||||
"description": "Please enter a valid HTTP or HTTPS URL."
|
||||
},
|
||||
"connectionTest": {
|
||||
"description": "Test the connetion before saving to verify the device is reachable.",
|
||||
"button": {
|
||||
"loading": "Testing...",
|
||||
"label": "Test connection"
|
||||
},
|
||||
"reachable": "Reachable",
|
||||
"notReachable": "Not reachable",
|
||||
"success": {
|
||||
"title": "Connection test successful",
|
||||
"description": "The device appears to be reachable."
|
||||
},
|
||||
"failure": {
|
||||
"title": "Connection test failed",
|
||||
"description": "Could not reach the device. Check the URL and try again."
|
||||
}
|
||||
}
|
||||
}
|
||||
},
|
||||
"nodeDetails": {
|
||||
"message": "Повідомлення",
|
||||
"requestPosition": "Запитати позицію",
|
||||
"traceRoute": "Trace Route",
|
||||
"airTxUtilization": "Air TX utilization",
|
||||
"allRawMetrics": "All Raw Metrics:",
|
||||
"batteryLevel": "Battery level",
|
||||
"channelUtilization": "Channel utilization",
|
||||
"details": "Details:",
|
||||
"deviceMetrics": "Device Metrics:",
|
||||
"hardware": "Hardware: ",
|
||||
"lastHeard": "Last Heard: ",
|
||||
"nodeHexPrefix": "Node Hex: ",
|
||||
"nodeNumber": "Node Number: ",
|
||||
"position": "Position:",
|
||||
"role": "Role: ",
|
||||
"uptime": "Uptime: ",
|
||||
"voltage": "Напруга",
|
||||
"title": "Node Details for {{identifier}}",
|
||||
"ignoreNode": "Ignore node",
|
||||
"removeNode": "Remove node",
|
||||
"unignoreNode": "Unignore node",
|
||||
"security": "Security:",
|
||||
"publicKey": "Public Key: ",
|
||||
"messageable": "Messageable: ",
|
||||
"KeyManuallyVerifiedTrue": "Public Key has been manually verified",
|
||||
"KeyManuallyVerifiedFalse": "Public Key is not manually verified"
|
||||
},
|
||||
"pkiBackup": {
|
||||
"loseKeysWarning": "If you lose your keys, you will need to reset your device.",
|
||||
"secureBackup": "Its important to backup your public and private keys and store your backup securely!",
|
||||
"footer": "=== END OF KEYS ===",
|
||||
"header": "=== MESHTASTIC KEYS FOR {{longName}} ({{shortName}}) ===",
|
||||
"privateKey": "Private Key:",
|
||||
"publicKey": "Public Key:",
|
||||
"fileName": "meshtastic_keys_{{longName}}_{{shortName}}.txt",
|
||||
"title": "Backup Keys"
|
||||
},
|
||||
"pkiBackupReminder": {
|
||||
"description": "We recommend backing up your key data regularly. Would you like to back up now?",
|
||||
"title": "Backup Reminder",
|
||||
"remindLaterPrefix": "Remind me in",
|
||||
"remindNever": "Never remind me",
|
||||
"backupNow": "Back up now"
|
||||
},
|
||||
"pkiRegenerate": {
|
||||
"description": "Are you sure you want to regenerate key pair?",
|
||||
"title": "Regenerate Key Pair"
|
||||
},
|
||||
"qr": {
|
||||
"addChannels": "Add Channels",
|
||||
"replaceChannels": "Replace Channels",
|
||||
"description": "The current LoRa configuration will also be shared.",
|
||||
"sharableUrl": "Sharable URL",
|
||||
"title": "Згенерувати QR-код"
|
||||
},
|
||||
"reboot": {
|
||||
"title": "Reboot device",
|
||||
"description": "Reboot now or schedule a reboot of the connected node. Optionally, you can choose to reboot into OTA (Over-the-Air) mode.",
|
||||
"ota": "Reboot into OTA mode",
|
||||
"enterDelay": "Enter delay",
|
||||
"scheduled": "Reboot has been scheduled",
|
||||
"schedule": "Schedule reboot",
|
||||
"now": "Reboot now",
|
||||
"cancel": "Cancel scheduled reboot"
|
||||
},
|
||||
"refreshKeys": {
|
||||
"description": {
|
||||
"acceptNewKeys": "This will remove the node from device and request new keys.",
|
||||
"keyMismatchReasonSuffix": ". This is due to the remote node's current public key does not match the previously stored key for this node.",
|
||||
"unableToSendDmPrefix": "Your node is unable to send a direct message to node: "
|
||||
},
|
||||
"acceptNewKeys": "Accept New Keys",
|
||||
"title": "Keys Mismatch - {{identifier}}"
|
||||
},
|
||||
"removeNode": {
|
||||
"description": "Are you sure you want to remove this Node?",
|
||||
"title": "Remove Node?"
|
||||
},
|
||||
"shutdown": {
|
||||
"title": "Розклад вимкнення",
|
||||
"description": "Turn off the connected node after x minutes."
|
||||
},
|
||||
"traceRoute": {
|
||||
"routeToDestination": "Route to destination:",
|
||||
"routeBack": "Route back:"
|
||||
},
|
||||
"tracerouteResponse": {
|
||||
"title": "Traceroute: {{identifier}}"
|
||||
},
|
||||
"unsafeRoles": {
|
||||
"confirmUnderstanding": "Я знаю, що роблю",
|
||||
"conjunction": " and the blog post about ",
|
||||
"postamble": " and understand the implications of changing the role.",
|
||||
"preamble": "I have read the ",
|
||||
"choosingRightDeviceRole": "Choosing The Right Device Role",
|
||||
"deviceRoleDocumentation": "Device Role Documentation",
|
||||
"title": "Ви впевнені?"
|
||||
},
|
||||
"managedMode": {
|
||||
"confirmUnderstanding": "Я знаю, що роблю",
|
||||
"title": "Ви впевнені?",
|
||||
"description": "Enabling Managed Mode blocks client applications (including the web client) from writing configurations to a radio. Once enabled, radio configurations can only be changed through Remote Admin messages. This setting is not required for remote node administration."
|
||||
},
|
||||
"clientNotification": {
|
||||
"title": "Client Notification",
|
||||
"TraceRoute can only be sent once every 30 seconds": "TraceRoute can only be sent once every 30 seconds",
|
||||
"Compromised keys were detected and regenerated.": "Compromised keys were detected and regenerated."
|
||||
},
|
||||
"resetNodeDb": {
|
||||
"title": "Reset Node Database",
|
||||
"description": "This will clear all nodes from the connected device's node database and clear all message history in the client. This cannot be undone. Are you sure you want to continue?",
|
||||
"confirm": "Reset Node Database",
|
||||
"failedTitle": "There was an error resetting the Node DB. Please try again."
|
||||
},
|
||||
"clearAllStores": {
|
||||
"title": "Clear All Local Storage",
|
||||
"description": "This will clear all locally stored data, including message history and node databases for all previously connected devices. This will require you to reconnect to your node once complete and cannot be undone. Are you sure you want to continue?",
|
||||
"confirm": "Clear all local storage",
|
||||
"failedTitle": "There was an error clearing local storage. Please try again."
|
||||
},
|
||||
"factoryResetDevice": {
|
||||
"title": "Factory Reset Device",
|
||||
"description": "This will factory reset the connected device, erasing all configurations and data on the device as well as all nodes and messages saved in the client. This cannot be undone. Are you sure you want to continue?",
|
||||
"confirm": "Factory Reset Device",
|
||||
"failedTitle": "There was an error performing the factory reset. Please try again."
|
||||
},
|
||||
"factoryResetConfig": {
|
||||
"title": "Factory Reset Config",
|
||||
"description": "This will factory reset the configuration on the connected device, erasing all configurations on the device. This cannot be undone. Are you sure you want to continue?",
|
||||
"confirm": "Factory Reset Config",
|
||||
"failedTitle": "There was an error performing the factory reset. Please try again."
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,38 @@
|
||||
{
|
||||
"maplibre": {
|
||||
"GeolocateControl.FindMyLocation": "Find my location",
|
||||
"NavigationControl.ZoomIn": "Zoom in",
|
||||
"NavigationControl.ZoomOut": "Zoom out",
|
||||
"CooperativeGesturesHandler.WindowsHelpText": "Use Ctrl + scroll to zoom the map",
|
||||
"CooperativeGesturesHandler.MacHelpText": "Use ⌘ + scroll to zoom the map",
|
||||
"CooperativeGesturesHandler.MobileHelpText": "Use two fingers to move the map"
|
||||
},
|
||||
"layerTool": {
|
||||
"nodeMarkers": "Show nodes",
|
||||
"directNeighbors": "Show direct connections",
|
||||
"remoteNeighbors": "Show remote connections",
|
||||
"positionPrecision": "Show position precision",
|
||||
"traceroutes": "Show traceroutes",
|
||||
"waypoints": "Show waypoints"
|
||||
},
|
||||
"mapMenu": {
|
||||
"locateAria": "Locate my node",
|
||||
"layersAria": "Change map style"
|
||||
},
|
||||
"waypointDetail": {
|
||||
"edit": "Редагувати",
|
||||
"description": "Description:",
|
||||
"createdBy": "Edited by:",
|
||||
"createdDate": "Created:",
|
||||
"updated": "Updated:",
|
||||
"expires": "Expires:",
|
||||
"distance": "Distance:",
|
||||
"bearing": "Absolute bearing:",
|
||||
"lockedTo": "Locked by:",
|
||||
"latitude": "Latitude:",
|
||||
"longitude": "Longitude:"
|
||||
},
|
||||
"myNode": {
|
||||
"tooltip": "This device"
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,39 @@
|
||||
{
|
||||
"page": {
|
||||
"title": "Повідомлення: {{chatName}}",
|
||||
"placeholder": "Введіть повідомлення"
|
||||
},
|
||||
"emptyState": {
|
||||
"title": "Оберіть чат",
|
||||
"text": "Поки немає повідомлень."
|
||||
},
|
||||
"selectChatPrompt": {
|
||||
"text": "Виберіть канал або вузол для початку обміну повідомленнями."
|
||||
},
|
||||
"sendMessage": {
|
||||
"placeholder": "Введіть ваше повідомлення тут...",
|
||||
"sendButton": "Надіслати"
|
||||
},
|
||||
"actionsMenu": {
|
||||
"addReactionLabel": "Додати реакцію",
|
||||
"replyLabel": "Відповісти"
|
||||
},
|
||||
"deliveryStatus": {
|
||||
"delivered": {
|
||||
"label": "Повідомлення доставлено",
|
||||
"displayText": "Повідомлення доставлено"
|
||||
},
|
||||
"failed": {
|
||||
"label": "Помилка доставлення повідомлення",
|
||||
"displayText": "Надсилання не відбулося"
|
||||
},
|
||||
"unknown": {
|
||||
"label": "Статус повідомлення невідомий",
|
||||
"displayText": "Невідомий стан"
|
||||
},
|
||||
"waiting": {
|
||||
"label": "Надсилання повідомлення",
|
||||
"displayText": "Очікування доставки"
|
||||
}
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,448 @@
|
||||
{
|
||||
"page": {
|
||||
"tabAmbientLighting": "Ambient Lighting",
|
||||
"tabAudio": "Аудіо",
|
||||
"tabCannedMessage": "Canned",
|
||||
"tabDetectionSensor": "Detection Sensor",
|
||||
"tabExternalNotification": "Ext Notif",
|
||||
"tabMqtt": "MQTT",
|
||||
"tabNeighborInfo": "Neighbor Info",
|
||||
"tabPaxcounter": "Paxcounter",
|
||||
"tabRangeTest": "Тест дальності",
|
||||
"tabSerial": "Серійний порт",
|
||||
"tabStoreAndForward": "S&F",
|
||||
"tabTelemetry": "Телеметрія"
|
||||
},
|
||||
"ambientLighting": {
|
||||
"title": "Ambient Lighting Settings",
|
||||
"description": "Settings for the Ambient Lighting module",
|
||||
"ledState": {
|
||||
"label": "LED State",
|
||||
"description": "Sets LED to on or off"
|
||||
},
|
||||
"current": {
|
||||
"label": "Current",
|
||||
"description": "Sets the current for the LED output. Default is 10"
|
||||
},
|
||||
"red": {
|
||||
"label": "Червоний",
|
||||
"description": "Sets the red LED level. Values are 0-255"
|
||||
},
|
||||
"green": {
|
||||
"label": "Зелений",
|
||||
"description": "Sets the green LED level. Values are 0-255"
|
||||
},
|
||||
"blue": {
|
||||
"label": "Синій",
|
||||
"description": "Sets the blue LED level. Values are 0-255"
|
||||
}
|
||||
},
|
||||
"audio": {
|
||||
"title": "Audio Settings",
|
||||
"description": "Settings for the Audio module",
|
||||
"codec2Enabled": {
|
||||
"label": "Codec 2 Enabled",
|
||||
"description": "Enable Codec 2 audio encoding"
|
||||
},
|
||||
"pttPin": {
|
||||
"label": "PTT Pin",
|
||||
"description": "GPIO pin to use for PTT"
|
||||
},
|
||||
"bitrate": {
|
||||
"label": "Bitrate",
|
||||
"description": "Bitrate to use for audio encoding"
|
||||
},
|
||||
"i2sWs": {
|
||||
"label": "i2S WS",
|
||||
"description": "GPIO pin to use for i2S WS"
|
||||
},
|
||||
"i2sSd": {
|
||||
"label": "i2S SD",
|
||||
"description": "GPIO pin to use for i2S SD"
|
||||
},
|
||||
"i2sDin": {
|
||||
"label": "i2S DIN",
|
||||
"description": "GPIO pin to use for i2S DIN"
|
||||
},
|
||||
"i2sSck": {
|
||||
"label": "i2S SCK",
|
||||
"description": "GPIO pin to use for i2S SCK"
|
||||
}
|
||||
},
|
||||
"cannedMessage": {
|
||||
"title": "Canned Message Settings",
|
||||
"description": "Settings for the Canned Message module",
|
||||
"moduleEnabled": {
|
||||
"label": "Module Enabled",
|
||||
"description": "Enable Canned Message"
|
||||
},
|
||||
"rotary1Enabled": {
|
||||
"label": "Rotary Encoder #1 Enabled",
|
||||
"description": "Enable the rotary encoder"
|
||||
},
|
||||
"inputbrokerPinA": {
|
||||
"label": "Encoder Pin A",
|
||||
"description": "GPIO Pin Value (1-39) For encoder port A"
|
||||
},
|
||||
"inputbrokerPinB": {
|
||||
"label": "Encoder Pin B",
|
||||
"description": "GPIO Pin Value (1-39) For encoder port B"
|
||||
},
|
||||
"inputbrokerPinPress": {
|
||||
"label": "Encoder Pin Press",
|
||||
"description": "GPIO Pin Value (1-39) For encoder Press"
|
||||
},
|
||||
"inputbrokerEventCw": {
|
||||
"label": "Clockwise event",
|
||||
"description": "Select input event."
|
||||
},
|
||||
"inputbrokerEventCcw": {
|
||||
"label": "Counter Clockwise event",
|
||||
"description": "Select input event."
|
||||
},
|
||||
"inputbrokerEventPress": {
|
||||
"label": "Press event",
|
||||
"description": "Select input event"
|
||||
},
|
||||
"updown1Enabled": {
|
||||
"label": "Up Down enabled",
|
||||
"description": "Enable the up / down encoder"
|
||||
},
|
||||
"allowInputSource": {
|
||||
"label": "Allow Input Source",
|
||||
"description": "Select from: '_any', 'rotEnc1', 'upDownEnc1', 'cardkb'"
|
||||
},
|
||||
"sendBell": {
|
||||
"label": "Send Bell",
|
||||
"description": "Sends a bell character with each message"
|
||||
}
|
||||
},
|
||||
"detectionSensor": {
|
||||
"title": "Detection Sensor Settings",
|
||||
"description": "Settings for the Detection Sensor module",
|
||||
"enabled": {
|
||||
"label": "Увімкнено",
|
||||
"description": "Enable or disable Detection Sensor Module"
|
||||
},
|
||||
"minimumBroadcastSecs": {
|
||||
"label": "Minimum Broadcast Seconds",
|
||||
"description": "The interval in seconds of how often we can send a message to the mesh when a state change is detected"
|
||||
},
|
||||
"stateBroadcastSecs": {
|
||||
"label": "State Broadcast Seconds",
|
||||
"description": "The interval in seconds of how often we should send a message to the mesh with the current state regardless of changes"
|
||||
},
|
||||
"sendBell": {
|
||||
"label": "Send Bell",
|
||||
"description": "Send ASCII bell with alert message"
|
||||
},
|
||||
"name": {
|
||||
"label": "Friendly Name",
|
||||
"description": "Used to format the message sent to mesh, max 20 Characters"
|
||||
},
|
||||
"monitorPin": {
|
||||
"label": "Monitor Pin",
|
||||
"description": "The GPIO pin to monitor for state changes"
|
||||
},
|
||||
"detectionTriggerType": {
|
||||
"label": "Detection Triggered Type",
|
||||
"description": "The type of trigger event to be used"
|
||||
},
|
||||
"usePullup": {
|
||||
"label": "Use Pullup",
|
||||
"description": "Whether or not use INPUT_PULLUP mode for GPIO pin"
|
||||
}
|
||||
},
|
||||
"externalNotification": {
|
||||
"title": "External Notification Settings",
|
||||
"description": "Configure the external notification module",
|
||||
"enabled": {
|
||||
"label": "Module Enabled",
|
||||
"description": "Enable External Notification"
|
||||
},
|
||||
"outputMs": {
|
||||
"label": "Output MS",
|
||||
"description": "Output MS"
|
||||
},
|
||||
"output": {
|
||||
"label": "Output",
|
||||
"description": "Output"
|
||||
},
|
||||
"outputVibra": {
|
||||
"label": "Output Vibrate",
|
||||
"description": "Output Vibrate"
|
||||
},
|
||||
"outputBuzzer": {
|
||||
"label": "Output Buzzer",
|
||||
"description": "Output Buzzer"
|
||||
},
|
||||
"active": {
|
||||
"label": "Active",
|
||||
"description": "Active"
|
||||
},
|
||||
"alertMessage": {
|
||||
"label": "Alert Message",
|
||||
"description": "Alert Message"
|
||||
},
|
||||
"alertMessageVibra": {
|
||||
"label": "Alert Message Vibrate",
|
||||
"description": "Alert Message Vibrate"
|
||||
},
|
||||
"alertMessageBuzzer": {
|
||||
"label": "Alert Message Buzzer",
|
||||
"description": "Alert Message Buzzer"
|
||||
},
|
||||
"alertBell": {
|
||||
"label": "Alert Bell",
|
||||
"description": "Should an alert be triggered when receiving an incoming bell?"
|
||||
},
|
||||
"alertBellVibra": {
|
||||
"label": "Alert Bell Vibrate",
|
||||
"description": "Alert Bell Vibrate"
|
||||
},
|
||||
"alertBellBuzzer": {
|
||||
"label": "Alert Bell Buzzer",
|
||||
"description": "Alert Bell Buzzer"
|
||||
},
|
||||
"usePwm": {
|
||||
"label": "Use PWM",
|
||||
"description": "Use PWM"
|
||||
},
|
||||
"nagTimeout": {
|
||||
"label": "Nag Timeout",
|
||||
"description": "Nag Timeout"
|
||||
},
|
||||
"useI2sAsBuzzer": {
|
||||
"label": "Use I²S Pin as Buzzer",
|
||||
"description": "Designate I²S Pin as Buzzer Output"
|
||||
}
|
||||
},
|
||||
"mqtt": {
|
||||
"title": "Налаштування MQTT",
|
||||
"description": "Settings for the MQTT module",
|
||||
"enabled": {
|
||||
"label": "Увімкнено",
|
||||
"description": "Enable or disable MQTT"
|
||||
},
|
||||
"address": {
|
||||
"label": "MQTT Server Address",
|
||||
"description": "MQTT server address to use for default/custom servers"
|
||||
},
|
||||
"username": {
|
||||
"label": "Ім'я користувача MQTT",
|
||||
"description": "MQTT username to use for default/custom servers"
|
||||
},
|
||||
"password": {
|
||||
"label": "Пароль MQTT",
|
||||
"description": "MQTT password to use for default/custom servers"
|
||||
},
|
||||
"encryptionEnabled": {
|
||||
"label": "Encryption Enabled",
|
||||
"description": "Enable or disable MQTT encryption. Note: All messages are sent to the MQTT broker unencrypted if this option is not enabled, even when your uplink channels have encryption keys set. This includes position data."
|
||||
},
|
||||
"jsonEnabled": {
|
||||
"label": "JSON Enabled",
|
||||
"description": "Whether to send/consume JSON packets on MQTT"
|
||||
},
|
||||
"tlsEnabled": {
|
||||
"label": "TLS Enabled",
|
||||
"description": "Enable or disable TLS"
|
||||
},
|
||||
"root": {
|
||||
"label": "Root topic",
|
||||
"description": "MQTT root topic to use for default/custom servers"
|
||||
},
|
||||
"proxyToClientEnabled": {
|
||||
"label": "MQTT Client Proxy Enabled",
|
||||
"description": "Utilizes the network connection to proxy MQTT messages to the client."
|
||||
},
|
||||
"mapReportingEnabled": {
|
||||
"label": "Map Reporting Enabled",
|
||||
"description": "Your node will periodically send an unencrypted map report packet to the configured MQTT server, this includes id, short and long name, approximate location, hardware model, role, firmware version, LoRa region, modem preset and primary channel name."
|
||||
},
|
||||
"mapReportSettings": {
|
||||
"publishIntervalSecs": {
|
||||
"label": "Map Report Publish Interval (s)",
|
||||
"description": "Interval in seconds to publish map reports"
|
||||
},
|
||||
"positionPrecision": {
|
||||
"label": "Approximate Location",
|
||||
"description": "Position shared will be accurate within this distance",
|
||||
"options": {
|
||||
"metric_km23": "Within 23 km",
|
||||
"metric_km12": "Within 12 km",
|
||||
"metric_km5_8": "Within 5.8 km",
|
||||
"metric_km2_9": "Within 2.9 km",
|
||||
"metric_km1_5": "Within 1.5 km",
|
||||
"metric_m700": "Within 700 m",
|
||||
"metric_m350": "Within 350 m",
|
||||
"metric_m200": "Within 200 m",
|
||||
"metric_m90": "Within 90 m",
|
||||
"metric_m50": "Within 50 m",
|
||||
"imperial_mi15": "У межах 15 миль",
|
||||
"imperial_mi7_3": "У межах 7,3 милі",
|
||||
"imperial_mi3_6": "У межах 3,6 милі",
|
||||
"imperial_mi1_8": "У межах 1,8 милі",
|
||||
"imperial_mi0_9": "У межах 0,9 милі",
|
||||
"imperial_mi0_5": "У межах 0,5 милі",
|
||||
"imperial_mi0_2": "У межах 0,2 милі",
|
||||
"imperial_ft600": "У межах 600 фт",
|
||||
"imperial_ft300": "У межах 300 фт",
|
||||
"imperial_ft150": "У межах 150 фт"
|
||||
}
|
||||
}
|
||||
}
|
||||
},
|
||||
"neighborInfo": {
|
||||
"title": "Neighbor Info Settings",
|
||||
"description": "Settings for the Neighbor Info module",
|
||||
"enabled": {
|
||||
"label": "Увімкнено",
|
||||
"description": "Enable or disable Neighbor Info Module"
|
||||
},
|
||||
"updateInterval": {
|
||||
"label": "Update Interval",
|
||||
"description": "Interval in seconds of how often we should try to send our Neighbor Info to the mesh"
|
||||
}
|
||||
},
|
||||
"paxcounter": {
|
||||
"title": "Paxcounter Settings",
|
||||
"description": "Settings for the Paxcounter module",
|
||||
"enabled": {
|
||||
"label": "Module Enabled",
|
||||
"description": "Enable Paxcounter"
|
||||
},
|
||||
"paxcounterUpdateInterval": {
|
||||
"label": "Update Interval (seconds)",
|
||||
"description": "How long to wait between sending paxcounter packets"
|
||||
},
|
||||
"wifiThreshold": {
|
||||
"label": "WiFi RSSI Threshold",
|
||||
"description": "At what WiFi RSSI level should the counter increase. Defaults to -80."
|
||||
},
|
||||
"bleThreshold": {
|
||||
"label": "BLE RSSI Threshold",
|
||||
"description": "At what BLE RSSI level should the counter increase. Defaults to -80."
|
||||
}
|
||||
},
|
||||
"rangeTest": {
|
||||
"title": "Range Test Settings",
|
||||
"description": "Settings for the Range Test module",
|
||||
"enabled": {
|
||||
"label": "Module Enabled",
|
||||
"description": "Enable Range Test"
|
||||
},
|
||||
"sender": {
|
||||
"label": "Message Interval",
|
||||
"description": "How long to wait between sending test packets"
|
||||
},
|
||||
"save": {
|
||||
"label": "Save CSV to storage",
|
||||
"description": "ESP32 Only"
|
||||
}
|
||||
},
|
||||
"serial": {
|
||||
"title": "Serial Settings",
|
||||
"description": "Settings for the Serial module",
|
||||
"enabled": {
|
||||
"label": "Module Enabled",
|
||||
"description": "Enable Serial output"
|
||||
},
|
||||
"echo": {
|
||||
"label": "Echo",
|
||||
"description": "Any packets you send will be echoed back to your device"
|
||||
},
|
||||
"rxd": {
|
||||
"label": "Receive Pin",
|
||||
"description": "Set the GPIO pin to the RXD pin you have set up."
|
||||
},
|
||||
"txd": {
|
||||
"label": "Transmit Pin",
|
||||
"description": "Set the GPIO pin to the TXD pin you have set up."
|
||||
},
|
||||
"baud": {
|
||||
"label": "Baud Rate",
|
||||
"description": "The serial baud rate"
|
||||
},
|
||||
"timeout": {
|
||||
"label": "Таймаут",
|
||||
"description": "Seconds to wait before we consider your packet as 'done'"
|
||||
},
|
||||
"mode": {
|
||||
"label": "Mode",
|
||||
"description": "Select Mode"
|
||||
},
|
||||
"overrideConsoleSerialPort": {
|
||||
"label": "Override Console Serial Port",
|
||||
"description": "If you have a serial port connected to the console, this will override it."
|
||||
}
|
||||
},
|
||||
"storeForward": {
|
||||
"title": "Store & Forward Settings",
|
||||
"description": "Settings for the Store & Forward module",
|
||||
"enabled": {
|
||||
"label": "Module Enabled",
|
||||
"description": "Enable Store & Forward"
|
||||
},
|
||||
"heartbeat": {
|
||||
"label": "Heartbeat Enabled",
|
||||
"description": "Enable Store & Forward heartbeat"
|
||||
},
|
||||
"records": {
|
||||
"label": "Number of records",
|
||||
"description": "Number of records to store"
|
||||
},
|
||||
"historyReturnMax": {
|
||||
"label": "History return max",
|
||||
"description": "Max number of records to return"
|
||||
},
|
||||
"historyReturnWindow": {
|
||||
"label": "History return window",
|
||||
"description": "Return records from this time window (minutes)"
|
||||
}
|
||||
},
|
||||
"telemetry": {
|
||||
"title": "Telemetry Settings",
|
||||
"description": "Settings for the Telemetry module",
|
||||
"deviceUpdateInterval": {
|
||||
"label": "Device Metrics",
|
||||
"description": "Device metrics update interval (seconds)"
|
||||
},
|
||||
"environmentUpdateInterval": {
|
||||
"label": "Environment metrics update interval (seconds)",
|
||||
"description": ""
|
||||
},
|
||||
"environmentMeasurementEnabled": {
|
||||
"label": "Module Enabled",
|
||||
"description": "Enable the Environment Telemetry"
|
||||
},
|
||||
"environmentScreenEnabled": {
|
||||
"label": "Displayed on Screen",
|
||||
"description": "Show the Telemetry Module on the OLED"
|
||||
},
|
||||
"environmentDisplayFahrenheit": {
|
||||
"label": "Display Fahrenheit",
|
||||
"description": "Display temp in Fahrenheit"
|
||||
},
|
||||
"airQualityEnabled": {
|
||||
"label": "Air Quality Enabled",
|
||||
"description": "Enable the Air Quality Telemetry"
|
||||
},
|
||||
"airQualityInterval": {
|
||||
"label": "Air Quality Update Interval",
|
||||
"description": "How often to send Air Quality data over the mesh"
|
||||
},
|
||||
"powerMeasurementEnabled": {
|
||||
"label": "Power Measurement Enabled",
|
||||
"description": "Enable the Power Measurement Telemetry"
|
||||
},
|
||||
"powerUpdateInterval": {
|
||||
"label": "Power Update Interval",
|
||||
"description": "How often to send Power data over the mesh"
|
||||
},
|
||||
"powerScreenEnabled": {
|
||||
"label": "Power Screen Enabled",
|
||||
"description": "Enable the Power Telemetry Screen"
|
||||
}
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,59 @@
|
||||
{
|
||||
"nodeDetail": {
|
||||
"publicKeyEnabled": {
|
||||
"label": "Public Key Enabled"
|
||||
},
|
||||
"noPublicKey": {
|
||||
"label": "No Public Key"
|
||||
},
|
||||
"directMessage": {
|
||||
"label": "Direct Message {{shortName}}"
|
||||
},
|
||||
"favorite": {
|
||||
"label": "Обране",
|
||||
"tooltip": "Add or remove this node from your favorites"
|
||||
},
|
||||
"notFavorite": {
|
||||
"label": "Not a Favorite"
|
||||
},
|
||||
"error": {
|
||||
"label": "Помилка",
|
||||
"text": "An error occurred while fetching node details. Please try again later."
|
||||
},
|
||||
"status": {
|
||||
"heard": "Heard",
|
||||
"mqtt": "MQTT"
|
||||
},
|
||||
"elevation": {
|
||||
"label": "Elevation"
|
||||
},
|
||||
"channelUtil": {
|
||||
"label": "Channel Util"
|
||||
},
|
||||
"airtimeUtil": {
|
||||
"label": "Airtime Util"
|
||||
}
|
||||
},
|
||||
"nodesTable": {
|
||||
"headings": {
|
||||
"longName": "Довга назва",
|
||||
"connection": "Connection",
|
||||
"lastHeard": "Last Heard",
|
||||
"encryption": "Шифрування",
|
||||
"model": "Model",
|
||||
"macAddress": "MAC-адреса"
|
||||
},
|
||||
"connectionStatus": {
|
||||
"direct": "Direct",
|
||||
"away": "away",
|
||||
"viaMqtt": ", через MQTT"
|
||||
}
|
||||
},
|
||||
"actions": {
|
||||
"added": "Додано",
|
||||
"removed": "Видалено",
|
||||
"ignoreNode": "Ігнорувати вузол",
|
||||
"unignoreNode": "Unignore Node",
|
||||
"requestPosition": "Запитати позицію"
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,230 @@
|
||||
{
|
||||
"navigation": {
|
||||
"title": "Навігація",
|
||||
"messages": "Повідомлення",
|
||||
"map": "Мапа",
|
||||
"settings": "Налаштування",
|
||||
"channels": "Канали",
|
||||
"radioConfig": "Налаштування радіо",
|
||||
"deviceConfig": "Налаштування пристрою",
|
||||
"moduleConfig": "Module Config",
|
||||
"manageConnections": "Manage Connections",
|
||||
"nodes": "Вузли"
|
||||
},
|
||||
"app": {
|
||||
"title": "Meshtastic",
|
||||
"logo": "Логотип Meshtastic"
|
||||
},
|
||||
"sidebar": {
|
||||
"collapseToggle": {
|
||||
"button": {
|
||||
"open": "Відкрити бічну панель",
|
||||
"close": "Закрити бічну панель"
|
||||
}
|
||||
},
|
||||
"deviceInfo": {
|
||||
"volts": "{{voltage}} Вольт",
|
||||
"firmware": {
|
||||
"title": "Прошивка",
|
||||
"version": "v{{version}}",
|
||||
"buildDate": "Дата збірки: {{date}}"
|
||||
}
|
||||
}
|
||||
},
|
||||
"batteryStatus": {
|
||||
"charging": "{{level}}% charging",
|
||||
"pluggedIn": "Plugged in",
|
||||
"title": "Батарея"
|
||||
},
|
||||
"search": {
|
||||
"nodes": "Пошук вузлів...",
|
||||
"channels": "Пошук каналів...",
|
||||
"commandPalette": "Пошук команд..."
|
||||
},
|
||||
"toast": {
|
||||
"positionRequestSent": {
|
||||
"title": "Запит на позицію надіслано."
|
||||
},
|
||||
"requestingPosition": {
|
||||
"title": "Requesting position, please wait..."
|
||||
},
|
||||
"sendingTraceroute": {
|
||||
"title": "Sending Traceroute, please wait..."
|
||||
},
|
||||
"tracerouteSent": {
|
||||
"title": "Traceroute sent."
|
||||
},
|
||||
"savedChannel": {
|
||||
"title": "Saved Channel: {{channelName}}"
|
||||
},
|
||||
"messages": {
|
||||
"pkiEncryption": {
|
||||
"title": "Чат використовує шифрування PKI."
|
||||
},
|
||||
"pskEncryption": {
|
||||
"title": "Чат використовує PSK шифрування."
|
||||
}
|
||||
},
|
||||
"configSaveError": {
|
||||
"title": "Помилка збереження налаштувань",
|
||||
"description": "An error occurred while saving the configuration."
|
||||
},
|
||||
"validationError": {
|
||||
"title": "Config Errors Exist",
|
||||
"description": "Please fix the configuration errors before saving."
|
||||
},
|
||||
"saveSuccess": {
|
||||
"title": "Saving Config",
|
||||
"description": "The configuration change {{case}} has been saved."
|
||||
},
|
||||
"saveAllSuccess": {
|
||||
"title": "Saved",
|
||||
"description": "All configuration changes have been saved."
|
||||
},
|
||||
"favoriteNode": {
|
||||
"title": "{{action}} {{nodeName}} {{direction}} favorites.",
|
||||
"action": {
|
||||
"added": "Додано",
|
||||
"removed": "Видалено",
|
||||
"to": "до",
|
||||
"from": "від"
|
||||
}
|
||||
},
|
||||
"ignoreNode": {
|
||||
"title": "{{action}} {{nodeName}} {{direction}} ignore list",
|
||||
"action": {
|
||||
"added": "Додано",
|
||||
"removed": "Видалено",
|
||||
"to": "до",
|
||||
"from": "від"
|
||||
}
|
||||
}
|
||||
},
|
||||
"notifications": {
|
||||
"copied": {
|
||||
"label": "Скопійовано!"
|
||||
},
|
||||
"copyToClipboard": {
|
||||
"label": "Копіювати до буфера обміну"
|
||||
},
|
||||
"hidePassword": {
|
||||
"label": "Приховати пароль"
|
||||
},
|
||||
"showPassword": {
|
||||
"label": "Показати пароль"
|
||||
},
|
||||
"deliveryStatus": {
|
||||
"delivered": "Доставлено",
|
||||
"failed": "Delivery Failed",
|
||||
"waiting": "Очікування",
|
||||
"unknown": "Unknown"
|
||||
}
|
||||
},
|
||||
"general": {
|
||||
"label": "General"
|
||||
},
|
||||
"hardware": {
|
||||
"label": "Hardware"
|
||||
},
|
||||
"metrics": {
|
||||
"label": "Метрики"
|
||||
},
|
||||
"role": {
|
||||
"label": "Роль"
|
||||
},
|
||||
"filter": {
|
||||
"label": "Фільтри"
|
||||
},
|
||||
"advanced": {
|
||||
"label": "Розширені"
|
||||
},
|
||||
"clearInput": {
|
||||
"label": "Clear input"
|
||||
},
|
||||
"resetFilters": {
|
||||
"label": "Скинути фільтри"
|
||||
},
|
||||
"nodeName": {
|
||||
"label": "Node name/number",
|
||||
"placeholder": "Meshtastic 1234"
|
||||
},
|
||||
"airtimeUtilization": {
|
||||
"label": "Airtime Utilization (%)",
|
||||
"short": "Airtime Util. (%)"
|
||||
},
|
||||
"batteryLevel": {
|
||||
"label": "Рівень заряду батареї (%)",
|
||||
"labelText": "Рівень заряду батареї (%): {{value}}"
|
||||
},
|
||||
"batteryVoltage": {
|
||||
"label": "Напруга батареї (В)",
|
||||
"title": "Напруга"
|
||||
},
|
||||
"channelUtilization": {
|
||||
"label": "Channel Utilization (%)",
|
||||
"short": "Channel Util. (%)"
|
||||
},
|
||||
"hops": {
|
||||
"direct": "Direct",
|
||||
"label": "Number of hops",
|
||||
"text": "Number of hops: {{value}}"
|
||||
},
|
||||
"lastHeard": {
|
||||
"label": "Last heard",
|
||||
"labelText": "Last heard: {{value}}",
|
||||
"nowLabel": "Зараз"
|
||||
},
|
||||
"snr": {
|
||||
"label": "SNR (дБ)"
|
||||
},
|
||||
"favorites": {
|
||||
"label": "Обране"
|
||||
},
|
||||
"hide": {
|
||||
"label": "Сховати"
|
||||
},
|
||||
"showOnly": {
|
||||
"label": "Show Only"
|
||||
},
|
||||
"viaMqtt": {
|
||||
"label": "Під'єднано за допомогою MQTT"
|
||||
},
|
||||
"hopsUnknown": {
|
||||
"label": "Unknown number of hops"
|
||||
},
|
||||
"showUnheard": {
|
||||
"label": "Never heard"
|
||||
},
|
||||
"language": {
|
||||
"label": "Мова",
|
||||
"changeLanguage": "Змінити мову"
|
||||
},
|
||||
"theme": {
|
||||
"dark": "Темна",
|
||||
"light": "Світла",
|
||||
"system": "Automatic",
|
||||
"changeTheme": "Змінити схему кольорів"
|
||||
},
|
||||
"errorPage": {
|
||||
"title": "This is a little embarrassing...",
|
||||
"description1": "We are really sorry but an error occurred in the web client that caused it to crash. <br /> This is not supposed to happen, and we are working hard to fix it.",
|
||||
"description2": "The best way to prevent this from happening again to you or anyone else is to report the issue to us.",
|
||||
"reportInstructions": "Please include the following information in your report:",
|
||||
"reportSteps": {
|
||||
"step1": "What you were doing when the error occurred",
|
||||
"step2": "What you expected to happen",
|
||||
"step3": "What actually happened",
|
||||
"step4": "Any other relevant information"
|
||||
},
|
||||
"reportLink": "Ви можете повідомити про проблему на нашому <0>GitHub</0>",
|
||||
"connectionsLink": "Return to the <0>connections</0>",
|
||||
"detailsSummary": "Інформація про помилку",
|
||||
"errorMessageLabel": "Помилка:",
|
||||
"stackTraceLabel": "Stack trace:",
|
||||
"fallbackError": "{{error}}"
|
||||
},
|
||||
"footer": {
|
||||
"text": "Powered by <0>▲ Vercel</0> | Meshtastic® is a registered trademark of Meshtastic LLC. | <1>Legal Information</1>",
|
||||
"commitSha": "SHA коміту: {{sha}}"
|
||||
}
|
||||
}
|
||||
Reference in New Issue
Block a user